|
|
|
|
Accurate tabletting
|
|
|
Compression in two stages
|
|
|
Tabletting compartment separated
from drive mechanism
|
|
|
Mechanical compresssion system
|
|
|
Easy maintenance & cleaning
|
|
|
Meets GMP.
|
|
| ................................................................................................................................... |
|
|
|
HAVE PROVEN TO BE
RELIABLE FOR:
|
|
Efficient large size production
runs, withcapacity upto 169,000 tablet per hour.
|
| |
|
MACHINE DRIVE COMPLETELY
SEPARATED FROM PRODUCTION AREA
|
|
Direct rotation of the turret
by the main shaftreduces the noise level. The gearbox, with
a casehardened nickel steel ground worm and bronze wormwheel
(dia 500mm), it provides maximum protection to the gears and
the drive system.
|
|
 |
 |
|
* Operator control panel is designed
with controls and indicating devices to minimize operator
attention.
|
|
| ................................................................................................................................... |
|
|
|
SAFETY DEVICE
|
|
Upper punch monitoring device
is available that would switch off the machine in the event
of punch tightness.
|
|
|
|
MECHANICAL FEEDER
|
|
The two chambers feeding
system is driven from top by a variable speed motor. The unit
can be easily assembled or disassembled for cleaning.
|
| |
|
PRE-COMPRESSION
AND MAIN COMPRESSION
|
|
For successful high speed
tablet production of difficult and direct compression material,
the large diameter of pre-compression roll (196mm)increase
punch dwell times and allows for difficult formulations to
be processed at high speed without loss of tablet quality.
|
|
| CLEANING AND TOOL
CHANGEOVER |
| The detachable panels can
be removed easily, to expose the entire lower punch cams, and
simplify the removal of lower punches & dies. |
|
| UPPER & LOWER
PUNCH SEALS |
| The scrapers seals for the
upper punches protect tablets from oil dripping, while the dust
seals on the lowers prevent the punches from binding and reduce
wear on the cam. This features combined with an efficient dust
extraction system allows prolonged run with minimum downtime
for cleaning. |
|
| .................................................................................................................................. |
Specifications:
|
MODEL
|
JC-SH-310
|
JC-SH- 29DB
|
JC-SH- 39B
|
JC-SH-47BB
|
| Type of tooling |
IPT"D"
EU"D"
|
IPT"D"
EU"D"
|
IPT"B"
EU"B"
|
IPT"BB"
EU"BB"
|
| Number of station |
31
|
39
|
39
|
47
|
| Maximum Table diameter |
25.4mm
1"
|
19mm(caplet)
(3/4")
|
16mm
(5/8")
|
13mm
(33/64")
|
Production capactity
(tablets/hour) * |
27,900-111,600
|
35,100-140,000
|
42,300-169,000
|
Revolution of turret / Min
(60 cyc)* |
15-60 RPM
|
| Depth of fill adjustable
to |
19mm (3/4")
|
17mm (43/64")
|
| Maximum operating pressure
|
10,000kgs (22,000lb)
|
6,000kgs (13,200lb)
|
| Maximum pre-pressure |
10,000kgs (22,000lb)
|
6,000kgs (13,200lb)
|
| Diameter of die |
38.1mm (1.5")
|
30.16mm (1.1875")
|
24mm(0.945")
|
| Height of die |
23.81mm (0.9375")
|
22.22mm (0.945")
|
| Nominal diameter of punch
body |
25.4 mm (1")
|
19 mm(3/4")
|
| Overall Length of upper Punch
|
IPT 133.35 mm (5.25") or
EU 133.6 mm
|
| Overall Length of lower Punch
|
IPT 133.35 mm (5.25") or
EU 133.6 mm
|
| Turret P.C.D |
490 mm
|
| Power consumption |
5HP (3.7kw)
|
| Machine dimensions |
900x1100x1750mm(H) (not including
hopper)
|
|
*Subjest to the characteristics
of the power.
*The manufacturer reserves
the right to modifty the design, specifiaction, etc., to improve
the performance of the machine without notice. All the specifiaction
shown are reference only. |
|
