|
|
|
|
For large batch production.
|
|
|
Allow for sngle layer tabletting
with double-sided output.
|
|
|
Accurate tabletting.
|
|
|
Tabletting compartment separated
from drive mechanism.
|
|
|
Mechanical compresssion system.
|
|
|
Easy maintenance & cleaning.
|
|
|
Meets GMP.
|
|
| ................................................................................................................................... |
|
|
|
Cam design &
lubrication
|
|
A centeral lubrication system
supplies oil contiuously to lower punches, & upper punches.
The ejection cam is manufacterd from special tool steel for
extended life, while a double sided lifting cam is provided.
|
|
|
|
Safety device
|
|
Upper punch monitoring device
is available that would switch off the machine in the event
of punch tightness.
|
|
|
|
Cleaning and tool
changeover
|
|
The detachable panels can
be removed easily, whicj reveal the entrte lower punch cams
This allows easy removal of the lower punches.
|
|
|
|
Machine drive is
completely separated from the presss space
|
|
Direct totation of the truuet
by the main shaft reduces the noise level. The gearbox, with
a casehardened nickel steel ground worm amd bronze wormwheel,
it provides maximum protection to the gears and the drive
system.
|
|
|
|
Mechanical feeder
|
|
The two chambers feeding
system is driven from top by a variable speed motor. The unit
can be easily assembled or disassembled for cleaning.
|
|
|
|
Pre-compression
and main compression
|
|
For successful high speed
table production of difficult and direct compression material,
the large diameter of pre-compression roll increase punch
dwell time and allows for difficult formulations to be processed
at high speed without losss of tablet quality.
|
|
| ................................................................................................................................... |
| Mechanical compression
system |
| The design of mechanical
compression system can be ensured for longer production runs.
Pressure rollers are made of special tool steel that ensures
uniform pressure application, the double bearings are fitted,
which minimize wearing of the rollers. |
|
|
|
|
Upper & Lower
punch seals
|
|
The scrapers seals for the
upper punches protect tablets from oil drip, while the dust
seals on the lowers prevent thepunches from binding and reduce
wear on the cam.
This combined with an efficient dust extraction system allows
prolonged run with little downtime for cleaning.
|
|
| .................................................................................................................................. |
Specifications:
|
MODEL
|
JC-DH-230
|
JC-DH-
29DB
|
JC-DH-
29B
|
JC-DH-35BB
|
| Type of tooling |
IPT"D"
EU"D"
|
IPT"D"
EU"D"
|
IPT"D"
EU"B"
|
IPT"BB"
EU"BB"
|
| Number of station |
31
|
39
|
39
|
47
|
| Maximum Table diameter |
25.4mm
1"
|
19mm(caplet)
(3/4")
|
16mm
(5/8")
|
13mm
(33/64")
|
Production capactity
(ablets/hours) * |
52000-200000
|
65000-260000
|
78000-312000
|
Revolution of turret / Min
(60 cyc)* |
14-56 RPM
|
| Depth of fill adjustable
to |
19mm (3/4")
|
17mm (43/64")
|
| Maximum operating pressure
|
10,000kgs (22,000lb)
|
6,000kgs (13,200lb)
|
| Maximum pre-pressure |
3,000kgs (6,600lb)
|
3,000kgs (6,600lb)
|
| Diameter of die |
38.1mm (1.5")
|
30.16mm (1.1875")
|
24mm(0.945")
|
| Height of die |
23.81mm (0.9375")
|
22.22mm (0.945")
|
| Nominal diameter of punch
body |
25.4 mm (1")
|
19 mm(3/4")
|
| Overall Length of upper Punch
|
IPT 133.35 mm (5.25") or
EU 133.6 mm
|
| Overall Length of lower Punch
|
IPT 133.35 mm (5.25") or
EU 133.6 mm
|
| Turret P.C.D |
490 mm
|
| Power consumption |
5HP (3.7kw)
|
| Machine dimensions |
900x1100x1750mm(H) (not including
hopper)
|
| Net weight |
2600 kgs (5720 Ibs)
|
|
*Subjest to the characteristics
of the power.
*The manufacturer reserves
the right to modifty the design, specifiaction, etc., to improve
the performance of the machine without notice. All the specifiaction
shown are reference only. |
|
