High
Speed Mixer / Granulator
|
| |
|
| Features |
กฐ |
Raw
material feeding to high speed mixer can be
manual through the fully open lid, or completely
automatic through suitable inlets on the lid.
Conical mixing bowl structure helps preventing
an adhesion of raw material and providing
a smoother flow of materials inside the bowl.
Finished product is discharged by centrifulgal
force through pneumatic discharge valve into
product container or directly to fluid bed
dryer bowl. |
|
| Application |
| |
Suitable
for pharmaceuticals, foods, chemicals, cosmetics,
electronics, ceramics, rubbers and plastic
industries etc. raw material binder of mixing
and granulating. |
| |
|
| cGMP-Design
Function |
| |
Use
different powder, by horizontal high speed
get well mixed, and proper binder, through
vessel side chopper cut to particles, and
by discharge port to take out finished products,
normally the dry powder mixing time is about
1~3 minutes, the wet grains making is about
3~5 minutes to be finished. |
| |
|
| Control
System |
| |
1. |
Both
main agitator and chopper motor can
adjust with high speed and low speed. |
2. |
Optimal
safety and integrity protective action
device. |
3. |
Mixing
and grains making timer automatic
control, also check time lapsing. |
4. |
Operation
switch independently, also show loading
current. |
|
| |
|
| Safety
Action |
| |
Mixing
vessel and material discharge protection cover
if no close, the m/c will not running, vice
versa, this m/c will automatic stop if open
it suddenly during operation. |
| |
|
| Contamination
Proof Dervice |
| |
By
through the compressed air of 2£gm absolute
filter into special designed agitator and
chopper shaft air seal to prevent powder into
transmission shaft from contamination. |
| |
|
| Construction |
| |
This
machine designed to comply with cGMP requirements,
safety structure, no contamination, easy to
operature and clean, the body material made
of AISI 316L stainless steel, general speaking,
it consists of the mixing vessel, agitator
blade, chopper blade, frame, motor transmission
device, discharge port and control system,
meantime the control box use the device of
proof of water and dust. |
| |
|
| Agitation
Vessel |
| |
1. |
It
designed of waterproof that can wash
tank inside. |
2. |
With
the cone shaped mixing cylindrical vessel
that make peripheral powder and binder
toward the center for better mixing
effect. |
3. |
The
upper cover with raw material inlet
and dust collection filter bag, in
order to keep the products from dust
contamination. |
4. |
Adopt
pneumatic system, and the cover with
safe protection switch. |
5. |
Big
volume type with the CIP cleaning device. |
|
| |
|
| Discharge
Port |
| |
1. |
Rapid
operation so as to let finished product
short discharge time. |
2. |
Adopt
pneumatic system, and the cover with
safe protection switch. |
|
|
| Specification |
Model |
Total
Contents |
Working
Batch |
Agitator
Drive |
Agitator
Speed |
Chopper
Drive |
Chopper
Speed |
Dimension
WxLxH |
Weight |
Unit |
Liter |
KG |
KW |
RPM(60Hz) |
KW |
RPM(60Hz) |
mm |
KG |
ECSM-
20 |
20 |
5 |
1.5/2.2 |
215/140 |
1.1/1.5 |
1720/3440 |
540x1543x1238 |
200 |
ECSM-100 |
100 |
30 |
3.7/5.5 |
172/120 |
1.5/2.2 |
1720/3440 |
850x2040x1700 |
850 |
ECSM-150 |
150 |
60 |
5.5/5.7 |
172/120 |
2.2/3.7 |
1720/3440 |
900x2250x2000 |
1,000 |
ECSM-250 |
250 |
100 |
10/12 |
172/120 |
3.7/5.5 |
1720/3440 |
1190x2370x2150 |
1500 |
ECSM-400 |
400 |
150 |
22.5/26.5 |
145/95 |
3.7/5.5 |
1720/3440 |
1720x2650x2800 |
2500 |
ECSM-600 |
600 |
200 |
37 |
120 |
10 |
1720/3440 |
1720x3000x2800 |
3200 |
|
|
|
|
