Hot
Air Sterilizer / Clean Room Oven 300°C
|
| |
|
Hot
air sterilizer machinery designed according to forced
convection principle with fast hot-air transmission
circulation, and then through HEPA FILTER ensures
the chamber air class within 100. When hot air temperature
up to 170°C~260°C then reduce temperature
the chamberr inside the bottle, appliance, aluminum
cover and rubber stopper (Low temp.) completed non
germ and in according with the cGMP requlations.
Before the machine leave the factory finish whole
testing. Provide equipment IQ & OQ data manual,
and all instruments calibrating report such as sheet
document, contain varied kind of gauge and temperature
sensor, provide original CALIBRATION document, correspondence
with cGMP requirement. |
|
| Application |
- |
Apply
to pharmaceutical / electronics / chemical / foods
etc. Mainly use for glass metal sterilizer and hot
source effective. Such as vial, ampoule, injection
bottles, aluminum cover etc. |
|
|
| Features: |
- |
The
quality dependable, in according with cGMP
requlation. |
- |
Absolute
high temperature (750°F) and high efficiency
hepa filter (DOP. Test 99.97%), ensure air
class within 100 (use hot air effect hepa
filiter to filter after enter chamber will
complete sterilize bacteria, charmber inside
bacteria quantity below 6 log |
- |
Intake/
exhaust choice 99.97% filter dervice to use. |
- |
Charge
DOP, particle counter tets hole and validation
testing holes are available for inspection. |
- |
Prepare
a validation hole to make quality assurance
people test the FP/FH value of the chamber
between the heating distribution and the heating
penetration. |
- |
During
sterilizer process, the charmber inside empties
temp within ±5°C. |
- |
Every
filter has one pressure gauge check two-side
the pressure and check filiter within. |
- |
Intake
/ exhaust has one damper can compete control
every cycle open and close. |
|
|
|
| Control
System |
|
Hot
air sterilizer system use human machine interface
touch screen (LCD with color) and PLC sequence
controller easy to operate and maintain, operation
panel can set up several type of display information,
according the screen description to operate,
adjust or install the machine. |
1. |
Cnotrol
system use silicone control rectifier (SCR)
module, and coordinate with auto stable temperature
curve during sterilization. |
2. |
By
temperature recorder to record continuous
cure of the chamber sterilization process,
can choose 6 points or 12 points. |
3. |
Automatic
sterilizer cycle including heating -->
drying --> sterilizing --> cooling -->
finishing etc. five stages. |
4. |
Prevent
hot temperature and bottle break when cooling
cycle not yet finish the door can't open. |
5. |
Option
purchase equipment to check chamber during
turning is regular condition and recorder
display pressure value. |
|
|
|
| Construction |
- |
This
machine is designed and fabricated by high
quality technique, all construction materials
are made of AISI 304, or 316L stainless steel
and comply with cGMP standard. |
- |
Sealed
door packing use ring silicone rubber material,
ensure hot air no leakage. |
- |
Adjustable
inlet and outlet damper for chamber heat distribution. |
- |
Sealed
interior chamber (argon welding) and stainless
steel chamber permit washing the chamber. |
- |
Single
door or pass through type double door available. |
- |
Auto
controller has two temp control ensure operate
safety. |
- |
The
sterilizer has two-door design that seoarates
the sterilizer from the washing room and sterilized
room. |
- |
The
bottle loading are from washing room side
after sterilization completion products unloading
are only from sterilizing room side. |
- |
The
door control use interlock device to avoid
different air class causing contamination. |
- |
Sterilizer
trolley use stainless and sterilizer tray
can in harmony with filling machine use. |
|
|
| Specification |
Item
Model |
Chamber
Dimension
(WxHxD) |
External
Dimension
(WxHxD) |
Heater
(KW) |
Fan
(HP) |
Max.
Temp
(°C) |
ECHS-15 |
850x1000x1000 |
2000x2100x1350 |
15 |
1 |
280 |
ECHS-18 |
850x1200x1000 |
2000x2300x1350 |
18 |
2 |
280 |
ECHS-24 |
850x1500x1000 |
2000x2600x1350 |
24 |
2 |
280 |
ECHS-30 |
1000x1650x1220 |
2150x2750x1570 |
30 |
3 |
280 |
ECHS-36 |
1200x1650x1220 |
2350x2750x1570 |
36 |
3 |
280 |
ECHS-45 |
1600x1650x3000 |
2750x2750x1300 |
45 |
5 |
280 |
|
 |
|
|
