| Blister Packaging Machine |
|
|
|
BLISTER PACK DK-PS 20A/30A/40A
|
|
|
|
BLISTER PACK DK-PS 200 / 400
|
|
|
|
The manufacturer reserves the right to modify
the design, specification, etc.,
to improve the performance of the machine without notice. |
|
|
All the specofication shown are just for
reference. |
|
| |
| PROCEDURE: |
 |
Forming film of reel support with automatic
unwinding system. |
|
|
Plate heating system. Lift-off on machine
stop. |
|
|
Compressed air forming station. |
|
|
Filling device (Automatic or manual). |
|
|
Coverfoil of reel support with automatic
unwinding system. |
|
|
Guide rails. |
|
Sealing station. |
|
Cooling station. |
|
Punching station. |
|
Waste winding unit. |
|
| |
|
Advantages of the platen sealing system:
|
|
|
Sufficient process time. |
|
|
Constant and relatively low
sealing temperature over the full sealing plaren. |
|
|
Low energy cost. |
|
|
Flexibility to seal a range
of lid materials. |
|
|
Proportional heat control with
only +/- 5°C variation. |
|
|
Uniform pressure distribution
over the full platen surface. |
|
Heat transfer to product is
avoided. |
|
Absorption of sealing load
within the station. |
|
Separation of indexing and
sealing functions. |
|
| |
| OPTIONAL ACCESSORIES: |
|
Slitter station or perforation station. |
|
Auto feeding device for capsule with orientation. |
|
Vibrator auto feeding device for Tablet/Caplet. |
|
Discharge conveyor device. |
|
Safety guard. |
|
Missing check. |
|
Printed mark controller. |
|
| |
| APPLICATIONS: |
|
Pharmaceutical:Tablets, Capsule, Ampoules,
Vials etc. |
|
| |
| Flow Chart
|
 |
|
| Mould |
 |
|
 |
 |
| * Upper & Lower forming
tool. |
|
* Slitter tool. |
 |
 |
|
| * Perforation tool. |
|
|
|
| |
| Feed Systems
|
 |
 |
 |
| * |
Auto-feeding device
for capsule with
orientation. |
|
| * |
Vibrator for Tab /
caplet Auto
feeding device. |
|
|
|
 |
* |
Hopper for pill / sugar coating
tab products. |
| |
|
|
 |
* |
Hopper for manual feeding
products. |
|
|
|
|
| |
|
|
DK-PS 200
|
DK-PS 400
|
DK-PS 20A
|
DK-PS 30A
|
DK-PS 40A
|
Formed area available
(max mm) |
80(W)x110(L)
|
80(W)x190(L)
|
80(W)x120(L)
|
80(W)x150(L)
|
100(W)x190(L)
|
Form film thickness
(mm) |
150-300 micron
|
150-300 micron
|
250-350
micron
|
250-350
micron
|
250-350
micron
|
Lid foil width
(max mm) |
124
|
195
|
124
|
154
|
195
|
Forming depth
(mm) |
13
|
13
|
13
(or as require)
|
13
(or as require)
|
13
(or as require)
|
| Reel diameter |
| Film (max mm) |
| foil (max mm) |
| core (mm) |
|
|
|
|
|
|
Conveying length
(max mm) |
100
|
108
|
112
|
112
|
112
|
Capacity / Strokes
(max) |
50
|
50
|
50
|
50
|
50
|
| Electrical Connection |
220V,380V,
440V50 Hz
or 60 Hz |
220V,380V,
440V50 Hz
or 60 Hz |
220V,380V,
440V50 Hz
or 60 Hz |
220V,380V,
440V50 Hz
or 60 Hz |
220V,380V,
440V50 Hz
or 60 Hz |
Compressed
air Consumption |
10.7 CFM
at 7Kg/Cm2
G303 L/Min |
16.4 CFM
at 7Kg/Cm2
G464 L/Min |
36.9-52.4 CFM
at 7Kg/Cm2
G1045-1484 L/Min |
36.9-52.4 CFM
at 7Kg/Cm2
G1045-1484 L/Min |
52.4-82.4 CFM
at 7Kg/Cm2
G1484-2334 L/Min |
Cooling water
Consumption |
0.06m3-0.1m3
/ Hr15oC-20oC |
0.18m3-0.3m3
/ Hr15oC-20oC |
0.06m3-0.1m3
/ Hr15oC-20oC |
0.06m3-0.1m3
/ Hr15oC-20oC |
0.18m3-0.3m3
/ Hr15oC-20oC |
Floor space
(approx mm) |
2350Lx960W
x1550H |
2350Lx960W
x1550H |
3260Lx800W
x1550H |
3260Lx800W
x1550H |
3260Lx800W
x1550H |
MAIN MOTOR,
HEATER |
1HP, 3-4W
|
2HP, 5.1-7W
|
1/4HP, 3-4W
|
1/4HP, 4-6W
|
1/4HP, 5-7W
|
Shipping
Data: |
G.W. Kg |
| N.W. Kg |
| (approx) |
Cu-Ft |
|
|
|
|
|
|
|
| |
| |
